Top > Back > 学術論文・プロシーディングス・著作 の検索結果 217 件中 31‐60 件目
| Transfer Durability of Line-Patterned Replica Mold Made of High-Hardness UV-Curable Resin |
| [ 全著者名 ] Tetsuma Marumo, Shin Hiwasa, Jun Taniguchi |
| [ 掲載誌名 ] Nanomaterials |
| [ 掲載年月 ] 2020年 10月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Moth-eye structured mold using sputtered glassy carbon layer for large-scale applications |
| [ 全著者名 ] Tomoya Yano, Hiroyuki Sugawara, Jun Taniguchi |
| [ 掲載誌名 ] Micro and Nano Engineering |
| [ 掲載年月 ] 2020年 9月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of Flexible Fine Through-hole Electrodes for Printed Devices using UV-NIL |
| [ 全著者名 ] Kazuki Honjo, Atsuhiro Furuta, and Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2020年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Three-dimensional flow measurements around micro-pillars made by UV-NIL in water via micro-digital holographic particle tracking velocimetry (Micro-DHPTV |
| [ 全著者名 ] Yasuhiro Matsuda, Hiroshi Kigami, Noriyuki Unno, Shin-ichi Satake, and Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2020年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Boiling heat transfer enhancement by self-excited vibration |
| [ 全著者名 ] Noriyuki Unno, Kazuhisa Yuki, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
| [ 掲載年月 ] 2020年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Enhanced evaporation of porous materials with micropores and high porosity |
| [ 全著者名 ] Noriyuki UNNO, Kazuhisa YUKI, Ryo INOUE, Yasuo KOGO, Jun TANIGUCHI, Shin-ichi SATAKE |
| [ 掲載誌名 ] Journal of Thermal Science and Technology |
| [ 掲載年月 ] 2020年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Anti-fouling and optical characterization of micro-lens array with antireflection structure by UV-NIL |
| [ 全著者名 ] Masato Nakamura, Kazuma Kurihara, Ryohei Hokari, Shin Hiwasa, and Jun Taniguchi |
| [ 掲載誌名 ] JAPANESE JOURNAL OF APPLIED PHYSICS |
| [ 掲載年月 ] 2020年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Microchannel fabrication via ultraviolet-nanoimprint lithography and electron-beam lithography using an ultraviolet-curable positive-tone electron-beam resist |
| [ 全著者名 ] Haruki Matsumoto, Takao Okabe, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRONIC ENGINEERING |
| [ 掲載年月 ] 2020年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Transfer durability of high aspect ratio moth-eye structure on glassy carbon mold using release agent |
| [ 全著者名 ] Junya Kawauchi and Jun Taniguchi |
| [ 掲載誌名 ] JAPANESE JOURNAL OF APPLIED PHYSICS |
| [ 掲載年月 ] 2020年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of a micropatterned composite electrode for solid oxide fuel cells via ultraviolet nanoimprint lithography |
| [ 全著者名 ] Ryota Akama, Takao Okabe, Kazuyoshi Sato, Yoshiki Inaba, Naoki Shikazono, Anna Sciazko, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRONIC ENGINEERING |
| [ 掲載年月 ] 2020年 2月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Photocurable chemically-amplified positive-tone ultraviolet resist for multi lithography process |
| [ 全著者名 ] Takao Okabe, Jun Taniguchi |
| [ 掲載誌名 ] APPL PHYS EXPRESS |
| [ 掲載年月 ] 2019年 10月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of bio-inspired 3D nanoimprint mold using acceleration-voltage-modulation electron-beam lithography |
| [ 全著者名 ] Kohei Goto and Jun Taniguchi |
| [ 掲載誌名 ] Adv. Opt. Techn. |
| [ 掲載年月 ] 2019年 8月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Evaluation of Scratch Durability of Moth-eye Structures Made of High Hardness Ultraviolet Curable Resin |
| [ 全著者名 ] Masaki Ono, Shin Hiwasa, and Jun Taniguchi |
| [ 掲載誌名 ] J PHOTOPOLYM SCI TEC |
| [ 掲載年月 ] 2019年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Durability Evaluation of Antireflection Structure Replica Mold using High Hardness and Antifouling UV-curable Resin |
| [ 全著者名 ] Junya Kawauchi, Shin Hiwasa, and Jun Taniguchi |
| [ 掲載誌名 ] J PHOTOPOLYM SCI TEC |
| [ 掲載年月 ] 2019年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| 3D nanofabrication using controlled-accelerationvoltage electron beam lithography with nanoimprinting technology |
| [ 全著者名 ] Noriyuki Unno, Jun Taniguchi |
| [ 掲載誌名 ] Adv. Opt. Techn. |
| [ 掲載年月 ] 2019年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Ultra-violet nanoimprint lithography-compatible positive-tone electron beam resist for 3D hybrid nanostructures |
| [ 全著者名 ] Takao Okabe, Hiroo Maebashi, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRON ENG |
| [ 掲載年月 ] 2019年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of an antireflection structure on an aspherical lens using a UV-curable inorganic–organic hybrid polymer |
| [ 全著者名 ] Ichiro Mano, Jun Taniguchi |
| [ 掲載誌名 ] JPN J APPL PHYS |
| [ 掲載年月 ] 2019年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Stencil mask using ultra-violet-curable positive-tone electron beam resist |
| [ 全著者名 ] Hiroo Maebashi, Takao Okabe, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRON ENG |
| [ 掲載年月 ] 2019年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of a hydrophobic three-dimensional hybrid structure using an UV-curable electron beam resist |
| [ 全著者名 ] Kohei Goto, Takao Okabe, Jun Taniguchi |
| [ 掲載誌名 ] JPN J APPL PHYS |
| [ 掲載年月 ] 2019年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of micro-lens array with antireflection structure |
| [ 全著者名 ] Masato Nakamura, Ichiro Mano, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRON ENG |
| [ 掲載年月 ] 2019年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Improvement of Transfer Durability of a Pillar-Shaped Release-Agent-Free Replica Mold in Ultraviolet Nanoimprint Lithography |
| [ 全著者名 ] Junpei Tsuchiya, Gen Nakagawa, Shin Hiwasa and Jun Taniguchi |
| [ 掲載誌名 ] Int. J. of Automation Technology |
| [ 掲載年月 ] 2018年 8月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Thermal roll-to-roll nanoimprinting using a replica mold without release agent |
| [ 全著者名 ] Noriyuki UNNO, Shohei KAKIMOTO, Tapio MÄKELÄ, Shin HIWASA and Jun TANIGUCHI |
| [ 掲載誌名 ] Journal of Advanced Mechanical Design Systems and Manufacturing |
| [ 掲載年月 ] 2018年 8月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication process for micropatterned ceramics via UV-nanoimprint lithography using UV-curable binder |
| [ 全著者名 ] Takao Okabe, Yongtae Kim, Zhenjun Jiao, Naoki Shikazono, Jun Taniguchi |
| [ 掲載誌名 ] JAPANESE JOURNAL OF APPLIED PHYSICS |
| [ 掲載年月 ] 2018年 8月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of Complex 3D Nanoimprint Mold by Using Acceleration Voltage Electron Beam Lithography |
| [ 全著者名 ] Kohei Goto and Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2018年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Development and optimization of water treatment reactors using TiO2-modified polymer beads with a refractive index identical to that of water |
| [ 全著者名 ] Arata Myoga, Ryutaro Iwashita, Noriyuki Unno, Shin-ichi Satake, Jun Taniguchi, Kazuhisa Yuki, Yohji Seki |
| [ 掲載誌名 ] OPTICAL REVIEW |
| [ 掲載年月 ] 2018年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Non-Residual Layer Transfer of High Viscous Ultraviolet Photocurable Resin Using Liquid Transfer Technique |
| [ 全著者名 ] Hiroki Ueda and Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2018年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Three-dimensional particle tracking in concave structures made by ultraviolet nanoimprint via total internal reflection fluorescence microscopy and refractive-index-matching method |
| [ 全著者名 ] Taku Fujinami, Hiroshi Kigami, Noriyuki Unno, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] OPTICAL REVIEW |
| [ 掲載年月 ] 2018年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Tough and antifouling antireflection structures made by partial-filling ultraviolet nanoimprint lithography |
| [ 全著者名 ] Hikari Eto, Shin Hiwasa, Jun Taniguchi |
| [ 掲載誌名 ] Microelectronic Engineering |
| [ 掲載年月 ] 2018年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of a stretchable transparent electrode with jagged grid structure using silver ink |
| [ 全著者名 ] Naoyuki Sato, Jun Taniguchi |
| [ 掲載誌名 ] Microelectronic Engineering |
| [ 掲載年月 ] 2018年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Transfer durability and fidelity of hard release-agent-free replica mold by repetition of ultraviolet nanoimprint lithography |
| [ 全著者名 ] Junpei Tsuchiya, Shin Hiwasa, Jun Taniguchi |
| [ 掲載誌名 ] Microelectronic Engineering |
| [ 掲載年月 ] 2018年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
