Top > Back > 学会発表 の検索結果 577 件中 301‐330 件目
Fabrication of the metal nano pattern on plastic substrate using roll nanoimprint |
[ 共同発表者名 ] Noriyuki Unno, Jun Taniguchi |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月20日 |
Repetition pattern transfer of high aspect ratio mold by UV-NIL |
[ 共同発表者名 ] Junki Takahashi, Jun Taniguchi |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月22日 |
Throughput improvement of roll mold fabrication process using electron beam lithography |
[ 共同発表者名 ] Jun Taniguchi,Shintaro Tsuji, Noriyuki Unno |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月22日 |
Nanoimprint mold fabrication methods using scanning probe lithography |
[ 共同発表者名 ] Takao Inoue, Jun Taniguchi, Toshihiko Ochi, Osamu Imai |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月22日 |
Fabrication of nano dots pattern mold and transfer of metal dots pattern |
[ 共同発表者名 ] Tadashi Ikemura, Jun Taniguchi |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月22日 |
Fabrication of carbon nanofibers using only ion beam irradiation to glassy carbon |
[ 共同発表者名 ] Takashi Okumoto, Jun Taniguchi, Yasuhiro Kamiya |
[ 学会・会議名 ] 36th International Conference on Micro- and Nano-Engineering 2010 |
[ 発表日付 ] 2010年9月20日 ~ 9月22日 |
Nanoimprint technology and its application |
[ 共同発表者名 ] Jun Taniguchi |
[ 学会・会議名 ] 2010 Taiwan-Japan Symposium on Polyscale Technologies for Biomedical Engineering and Environmental Sciences (PT-BEES) |
[ 発表日付 ] 2010年9月9日 |
Molecular Dynamics Simulation for Surface Deformation via Ar+ Ion Collision Process |
[ 共同発表者名 ] Shin-ichi, Satake, Sadao Momota, Akinori Fukushige, Shun Yamashina, Masahiko , Shibahara and Jun, Taniguchi |
[ 学会・会議名 ] The 17th conference on ion beam modification of materials (IBMM 2010) |
[ 発表日付 ] 2010年8月22日 ~ 8月27日 |
Molecular dynamics simulation of surface deformation via Ga+ collision process |
[ 共同発表者名 ] Shin-ichi Satake, Akinori Fukushige, Shun Yamashina, Masahiko Shibahara, Sadao Momota and Jun Taniguchi |
[ 学会・会議名 ] 10th conference in a series of international conferences on Computer Simulation of Radiation Effects in Solids (COSIRES 2010) |
[ 発表日付 ] 2010年7月19日 ~ 7月23日 |
Fabrication of seamless three-dimensional roll mold using electron beam direct writing to rotating cylindrical substrate |
[ 共同発表者名 ] Jun Taniguchi and Masao Aratani |
[ 学会・会議名 ] THE 54th INTERNATIONAL CONFERENCE on ELECTRON, ION, and PHOTON BEAM TECHNOLOGY & NANOFABRICATION |
[ 発表日付 ] 2010年6月3日 ~ 6月3日 |
Assessment of release properties on UV-NIL using nano-scale high aspect ratio mold |
[ 共同発表者名 ] Jun Taniguchi, Junki Takahashi, Yasuhiro Kamiya |
[ 学会・会議名 ] THE 54th INTERNATIONAL CONFERENCE on ELECTRON, ION, and PHOTON BEAM TECHNOLOGY & NANOFABRICATION |
[ 発表日付 ] 2010年6月2日 ~ 6月2日 |
Electrical properties of transferred nano metal pattern using metal oxide release layer method |
[ 共同発表者名 ] Noriyuki Unno, Jun Taniguchi, Shouichi Ide |
[ 学会・会議名 ] THE 54th INTERNATIONAL CONFERENCE on ELECTRON, ION, and PHOTON BEAM TECHNOLOGY & NANOFABRICATION |
[ 発表日付 ] 2010年6月2日 ~ 6月2日 |
同一スタンプを用いた2トーンナノプリントトランスファーに関する研究 |
[ 共同発表者名 ] 海野 徳幸,谷口 淳 |
[ 学会・会議名 ] 2010年度精密工学会 春季大会学術講演会 |
[ 発表日付 ] 2010年3月18日 |
高アスペクトナノ金型の作製と樹脂転写時の離型力の測定 |
[ 共同発表者名 ] 高橋 純輝,神谷 靖浩,谷口 淳 |
[ 学会・会議名 ] 2010年度精密工学会 春季大会学術講演会 |
[ 発表日付 ] 2010年3月18日 |
Ion-bombardment-enhanced etching of quartz |
[ 共同発表者名 ] Takashi Okumoto, Jun Taniguchi, Sadao Momota, Yasuo Kogo, Noritaka Kawasegi, and Noboru Morita |
[ 学会・会議名 ] The 5th Inthernational conferece on Leading Edge Manufacturing in 21st Century (LEM21) |
[ 発表日付 ] 2009年12月4日 |
Strain fiels in Si mold on UV-nanoimprint lithography |
[ 共同発表者名 ] Jun Taniguchi, Kazutomo Osari, Yasushi Morihira |
[ 学会・会議名 ] The 5th Inthernational conferece on Leading Edge Manufacturing in 21st Century (LEM21) |
[ 発表日付 ] 2009年12月4日 |
Focused ion beam machining of silicon carbide |
[ 共同発表者名 ] Takashi Okumoto, Kousuke Sawai, Jun Taniguchi, Takaaki Oosumi, Shin-ichi Satake, Shun Yamashina, Yasuo Kogo |
[ 学会・会議名 ] The 5th Inthernational conferece on Leading Edge Manufacturing in 21st Century (LEM21) |
[ 発表日付 ] 2009年12月4日 |
3D metal nano pattern transfer on PET using novel release method |
[ 共同発表者名 ] Noriyuki Unno, Jun Taniguchi, Shoichiro Ishikawa |
[ 学会・会議名 ] The 5th Inthernational conferece on Leading Edge Manufacturing in 21st Century (LEM21) |
[ 発表日付 ] 2009年12月3日 |
High aspect metal pattern replication technique using metal oxide release layer |
[ 共同発表者名 ] Noriyuki Unno, Jun Taniguchi |
[ 学会・会議名 ] The 4th International Symposium on Atomic Technology |
[ 発表日付 ] 2009年11月18日 ~ 11月18日 |
ナノインプリントにおけるUV硬化樹脂の温度依存性に関する研究 |
[ 共同発表者名 ] 佐竹 信一,金井 高弘,米本 幸弘,海野 徳幸,谷口 淳 |
[ 学会・会議名 ] 日本機械学会 熱工学コンファレンス2009 |
[ 発表日付 ] 2009年11月8日 ~ 11月8日 |
Two tone metal pattern transfer technique using same mold surface |
[ 共同発表者名 ] Noriyuki Unno, Shouichi Ide, Jun Taniguchi |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
Fabrication of nano dot arrays with 20nm or less size and effect of Post Exposure Bake |
[ 共同発表者名 ] Tetsuro Manabe, Jun Taniguchi, Kiyoshi Ishikawa |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
Fabrication of three-dimensional roll mold using electron beam direct writing to rotating cylindrical substrate |
[ 共同発表者名 ] Jun Taniguchi, Masao Aratani |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
Observation of filling behavior on UV nanoimprint lithography using release coating |
[ 共同発表者名 ] Jun Taniguchi, Kazutomo Osari, Ken-ich Machinaga, Nobuji Sakai, Takeshi Ohsaki |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
Fabrication of fine three-dimensional metal pattern on plastic substrate |
[ 共同発表者名 ] Shouichiro Ishikawa, Noriyuki Unno, Shoichi Ide, Jun Taniguchi |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
High density nano scale pattern transfer technique of UV nanoimprint lithography and measurement of release force |
[ 共同発表者名 ] Jun Taniguchi, Yasuhiro Kamiya, Nobuji Sakai, Takeshi Ohsaki |
[ 学会・会議名 ] 35nd International Conference on Micro- and Nano-Engineering 2009 |
[ 発表日付 ] 2009年9月29日 ~ 9月30日 |
酸化金属離型膜を用いた金属微細パターン直接転写法 |
[ 共同発表者名 ] 海野 徳幸、井手 翔一、石川 昇一郎、谷口 淳 |
[ 学会・会議名 ] 2009年度精密工学会 秋季大会学術講演会 |
[ 発表日付 ] 2009年9月10日 ~ 9月10日 |
集束イオンビームを用いたSiCの3次元モールドの作製 |
[ 共同発表者名 ] 奥本剛,沢井孝介,谷口淳,佐竹信一,山科瞬,向後保雄 |
[ 学会・会議名 ] 2009年度精密工学会 秋季大会学術講演会 |
[ 発表日付 ] 2009年9月10日 ~ 9月10日 |
Fabrication of anti-reflection structures and carbon nanofibers using only ion beam irradiation to glassy carbon |
[ 共同発表者名 ] Jun Taniguchi |
[ 学会・会議名 ] OIE ’09 The Eighth Japan-Finland Joint Symposium on Optics in Engineering |
[ 発表日付 ] 2009年9月4日 ~ 9月4日 |
High aspect metal pattern transfer technique on a plastic substrate using metal oxide release layer |
[ 共同発表者名 ] N. Unno and J. Taniguchi |
[ 学会・会議名 ] OIE ’09 The Eighth Japan-Finland Joint Symposium on Optics in Engineering |
[ 発表日付 ] 2009年9月4日 ~ 9月4日 |