Top > Back > 学術論文・プロシーディングス・著作 の検索結果 67 件中 1‐30 件目
| Thermal Nanoimprint Lithography—A Review of the Process,Mold Fabrication, and Material |
| [ 全著者名 ] Noriyuki Unno and Tapio Mäkelä |
| [ 掲載誌名 ] Nanomaterials |
| [ 掲載年月 ] 2023年 7月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Measuring subcooled boiling heat transfer on a CuCrZr surface to predict durability of a heat sink material for plasma-facing components |
| [ 全著者名 ] Noriyuki Unno, Junichiro Ono, Yuta Aoki, Kazuhisa Yuki, Yohji Seki, Shin-ichi Satake |
| [ 掲載誌名 ] FUSION ENGINEERING AND DESIGN |
| [ 掲載年月 ] 2023年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Acoustic state detection of microbubble emission boiling using a deep neural network based on cepstrum analysis |
| [ 全著者名 ] Junichiro Ono, Yuta Aoki, Noriyuki Unno, Kazuhisa Yuki, Koichi Suzuki, Yoshitaka Ueki, Shin-ichi Satake |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF MULTIPHASE FLOW |
| [ 掲載年月 ] 2023年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Experimental Investigation of Boiling Heat Transfer in a Liquid Chamber With Partially Soluble Nanofluids |
| [ 全著者名 ] Noriyuki Unno,Kazuhisa Yuki,Risako Kibushi,Atsuyuki Mitani |
| [ 掲載誌名 ] JOURNAL OF ELECTRONIC PACKAGING |
| [ 掲載年月 ] 2023年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| A 3D-Simulation and Experimental Study of the Fluid Flow Around a Nano-Step Structure Formed by UV-NIL |
| [ 全著者名 ] Tadashi Ando, Yusei Honda, Tomoki Yanagawa, Noriyuki Unno, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2023年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Effects of surface properties on wall superheat at the onset of microbubble emission boiling |
| [ 全著者名 ] Noriyuki Unno, Ryotaro Noma, Kazuhisa Yuki, Shin-ichi Satake, Koichi Suzuki |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF MULTIPHASE FLOW |
| [ 掲載年月 ] 2022年 7月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Heat transfer and pressure drop correlations for a gas flow in unidirectional porous copper tubes |
| [ 全著者名 ] Risako Kibushi, Kazuhisa Yuki, Noriyuki Unno, Shigeru Tanaka, Kazuyuki Hokamoto |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
| [ 掲載年月 ] 2022年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Heat Transfer Potential of Unidirectional Porous Tubes for Gas Cooling under High Heat Flux Conditions |
| [ 全著者名 ] Kazuhisa Yuki, Risako Kibushi, Ryohei Kubota, Noriyuki Unno, Shigeru Tanaka, Kazuyuki Hokamoto |
| [ 掲載誌名 ] Energies |
| [ 掲載年月 ] 2022年 1月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Visualization and Sound Measurements of Vibration Plate in a Boiling Bubble Resonator |
| [ 全著者名 ] Junichiro Ono, Noriyuki Unno, Kazuhisa Yuki, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] Fluids |
| [ 掲載年月 ] 2021年 12月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Impact of Water Treatment Reactor using TiO2-coated Micropillar Made by UV-NIL |
| [ 全著者名 ] Kazuki Daigo, Ryota Akama, Noriyuki Unno, Shin-ichi Satake, Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2021年 11月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Heat Transport Augmentation Using Vibration Material Excited by Boiling Bubbles for Heat Removal from Divertor |
| [ 全著者名 ] Noriyuki Unno, Kazuhisa Yuki, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] FUSION SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2021年 8月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Enhancement of the critical heat flux of saturated pool boiling by the breathing phenomenon induced by lotus copper in combination with a grooved heat transfer surface |
| [ 全著者名 ] Risako Kibushi, Kazuhisa Yuki, Noriyuki Unno, Tetsuro Ogushi, Masaaki Murakami, Tomiyuki Numata, Takuya Ide, Hikaru Nomura |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
| [ 掲載年月 ] 2021年 7月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Effect of the gap height between the vibration plate and heating surface on boiling heat transfer in a boiling bubble resonator |
| [ 全著者名 ] Noriyuki UNNO, Kazuhisa YUKI, Jun TANIGUCHI, Shin-ichi SATAKE |
| [ 掲載誌名 ] Journal of Thermal Science and Technology |
| [ 掲載年月 ] 2021年 1月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Three-dimensional Flow Measurements around Micro-pillars Made by UV-NIL in Water via Micro-digital Holographic Particle Tracking Velocimetry (Micro-DHPTV) |
| [ 全著者名 ] Yasuhiro Matsuda, Hiroshi Kigami, Noriyuki Unno, Shin-ichi Satake, Jun Taniguchi |
| [ 掲載誌名 ] JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY |
| [ 掲載年月 ] 2020年 7月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Thermal management of auto motive SiC-based on-board inverter with 500 W/cm2 in heat flux, and Two-phase immersion cooling by breathing phenomenon spontaneously induced by lotus porous copper jointed onto a grooved heat transfer surface |
| [ 全著者名 ] Kazuhisa YUKI, Risako KIBUSHI, Rikako TSUJI, Kio TAKAI, Noriyuki UNNO, Tetsuro OGUSHI, Masaaki MURAKAMI, Tomiyuki NUMATA, Hikaru NOMURA, Takuya IDE |
| [ 掲載誌名 ] Journal of Thermal Science and Technology |
| [ 掲載年月 ] 2020年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Enhanced evaporation of porous materials with micropores and high porosity |
| [ 全著者名 ] Noriyuki Unno, Kazuhisa Yuki, Ryo Inoue, Yasuo Kogo, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] Journal of Thermal Science and Technology |
| [ 掲載年月 ] 2020年 4月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Boiling heat transfer enhancement by self-excited vibration |
| [ 全著者名 ] Noriyuki Unno, Kazuhisa Yuki, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
| [ 掲載年月 ] 2020年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| 3D nanofabrication using controlled-acceleration-voltage electron beam lithography with nanoimprinting technology |
| [ 全著者名 ] Noriyuki Unno, Jun Taniguchi |
| [ 掲載誌名 ] Advanced Optical Technologies |
| [ 掲載年月 ] 2019年 5月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Advanced Boiling Cooling Technology Using a Compact Vessel with a Low Water Level |
| [ 全著者名 ] Noriyuki Unno, Kazuhisa Yuki, Risako Kibushi, Koichi Suzuki |
| [ 掲載誌名 ] Transactions of The Japan Institute of Electronics Packaging |
| [ 掲載年月 ] 2018年 12月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Thermal roll-to-roll nanoimprinting using a replica mold without release agent |
| [ 全著者名 ] Noriyuki UNNO, Shohei KAKIMOTO, Tapio MÄKELÄ, Shin HIWASA and Jun TANIGUCHI |
| [ 掲載誌名 ] Journal of Advanced Mechanical Design Systems and Manufacturing |
| [ 掲載年月 ] 2018年 10月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Heat transfer performance of an energy-saving heat removal device with uni-directional porous copper for divertor cooling |
| [ 全著者名 ] Kio Takai, Kohei Yuki, Kazuhisa Yuki, Risako Kibushi, Noriyuki Unno, Teruya Tanaka |
| [ 掲載誌名 ] FUSION ENGINEERING AND DESIGN |
| [ 掲載年月 ] 2018年 10月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Development and optimization of water treatment reactors using TiO2-modified polymer beads with a refractive index identical to that of water |
| [ 全著者名 ] Arata Myoga, Ryutaro Iwashita, Noriyuki Unno, Shin-ichi Satake, Jun Taniguchi, Kazuhisa Yuki, Yohji Seki |
| [ 掲載誌名 ] OPTICAL REVIEW |
| [ 掲載年月 ] 2018年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Three-dimensional particle tracking in concave structures made by ultraviolet nanoimprint via total internal reflection fluorescence microscopy and refractive-index-matching method |
| [ 全著者名 ] Taku Fujinami, Hiroshi Kigami, Noriyuki Unno, Jun Taniguchi, Shin-ichi Satake |
| [ 掲載誌名 ] OPTICAL REVIEW |
| [ 掲載年月 ] 2018年 3月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| CHARACTERISTICS OF WATER EVAPORATION ON A NANOPATTERNED SURFACE FABRICATED BY UV NANOIMPRINT LITHOGRAPHY |
| [ 全著者名 ] Noriyuki Unno, Motoharu Asano, Yuki Matsuda, Shin-ichi Satake, Jun Taniguchi |
| [ 掲載誌名 ] HEAT TRANSFER RESEARCH |
| [ 掲載年月 ] 2018年 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication of calibration plate for total internal reflection fluorescence microscopy using roll-type liquid transfer imprint lithography |
| [ 全著者名 ] Noriyuki Unno, Hiroshi Kigami, Taku Fujinami, Shuichiro Nakata, Shin-ichi Satake, Jun Taniguchi |
| [ 掲載誌名 ] MICROELECTRONIC ENGINEERING |
| [ 掲載年月 ] 2017年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Water-treatment reactors using titanium dioxide-modified polymer beads with an identical refractive index to water |
| [ 全著者名 ] Masataka Kuniyasu, Noriyuki Unno, Shin-ichi Satake, Kazuhisa Yuki, Yohji Seki |
| [ 掲載誌名 ] JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY |
| [ 掲載年月 ] 2017年 2月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Fabrication characteristics of a line-and-space pattern and a dot pattern on a roll mold by using electron-beam lithography |
| [ 全著者名 ] Kai OJIMA, Masashi SAITO, Noriyuki UNNO, Jun TANIGUCHI |
| [ 掲載誌名 ] Journal of Advanced Mechanical Design Systems and Manufacturing |
| [ 掲載年月 ] 2016年 9月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Miniaturization technique for nanoimprint replica mold with line and space pattern via mechanical deformation |
| [ 全著者名 ] Noriyuki UNNO, Toru MIEBORI, Takeo NAKAMURA, Jun TANIGUCHI |
| [ 掲載誌名 ] Journal of Advanced Mechanical Design Systems and Manufacturing |
| [ 掲載年月 ] 2016年 9月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| 3D measurement of the position of gold particles via evanescent digital holographic particle tracking velocimetry |
| [ 全著者名 ] Shin-ichi Satake, Noriyuki Unno, Shuichiro Nakata, Jun Taniguchi |
| [ 掲載誌名 ] MEASUREMENT SCIENCE and TECHNOLOGY |
| [ 掲載年月 ] 2016年 7月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
| Three-dimensional particle tracking around microstructures in water via total internal reflection fluorescence microscopy and refractive-index-matching method |
| [ 全著者名 ] Noriyuki Unno, Shuichiro Nakata, Shin-ichi Satake, Jun Taniguchi |
| [ 掲載誌名 ] EXPERIMENTS IN FLUIDS |
| [ 掲載年月 ] 2016年 6月 |
| [ 著作区分 ] レフェリー付学術論文（外国語） |
