Top > Back > 学会発表 の検索結果 577 件中 1‐30 件目
銀インクを用いた大気下における残膜レスパターン形成 |
[ 共同発表者名 ] 中村 有理, 谷口 淳 |
[ 学会・会議名 ] 第84回応用物理学会秋季学術講演会(2023) |
[ 発表日付 ] 2023年9月20日 ~ 9月20日 |
橋掛け構造を利用したステンシルマスクの作成方法 |
[ 共同発表者名 ] 田村 響生, 村上 湧祐, 谷口 淳 |
[ 学会・会議名 ] 第84回応用物理学会秋季学術講演会(2023) |
[ 発表日付 ] 2023年9月20日 ~ 9月20日 |
橋掛構造による転写圧を変えた時のUVナノインプリントの充填挙動の把握 |
[ 共同発表者名 ] 村上湧祐、谷口 淳 |
[ 学会・会議名 ] 2023年度精密工学会秋季大会学術講演会 |
[ 発表日付 ] 2023年9月15日 |
微細線構造レプリカモールドを用いた再離型処理時のUV-NIL転写回数の寿命予測 |
[ 共同発表者名 ] 若狭智仁、谷口 淳 |
[ 学会・会議名 ] 2023年度精密工学会秋季大会学術講演会 |
[ 発表日付 ] 2023年9月15日 |
金型転写の歴史と精度1 −ナノインプリント技術を例として− |
[ 共同発表者名 ] 谷口 淳 |
[ 学会・会議名 ] 2023年度精密工学会秋季大会学術講演会 |
[ 発表日付 ] 2023年9月15日 |
銀インクとナノインプリント技術を用いたナノパターン転写 |
[ 共同発表者名 ] 榎本圭祐、 谷口淳 |
[ 学会・会議名 ] 応用物理学会次世代リソグラフィ(NGL )技術研究会 主催 ワークショップ NGL2023 |
[ 発表日付 ] 2023年7月7日 ~ 7月7日 |
Fabrication of moth-eye structure film with two types of resin separated by micron-order regions |
[ 共同発表者名 ] Kazuki Fujiwara and Jun Taniguchi |
[ 学会・会議名 ] The 40th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2023年6月28日 ~ 6月28日 |
Transfer durability of re-release coated replica mold on ultraviolet nanoimprint lithography |
[ 共同発表者名 ] Tomohito Wakasa and Jun Taniguchi |
[ 学会・会議名 ] The 40th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2023年6月28日 ~ 6月28日 |
Filling behavior observation of UV-curable resin using bridge structure mold |
[ 共同発表者名 ] Yusuke Murakami, Yusuke Nagai and Jun Taniguchi |
[ 学会・会議名 ] The 40th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2023年6月28日 ~ 6月28日 |
Fabrication of a Rose-Petal Surface using Release-coated UV-curable Resin via Ultraviolet Nanoimprint Lithography |
[ 共同発表者名 ] Takuto WAKASA, Kazuki FUJIWARA, Jun Taniguchi |
[ 学会・会議名 ] The International Conference on Leading Edge Manufacturing/Materials&Processing (LEM&P 2023) |
[ 発表日付 ] 2023年6月13日 |
Fabrication of a High-Aspect-Ratio Electroformed Mold through Thermal Nanoimprinting |
[ 共同発表者名 ] Kazuki ARAI, Ryohei HOKARI, Kazuma KURIHARA, and Jun TANIGUCHI |
[ 学会・会議名 ] The International Conference on Leading Edge Manufacturing/Materials&Processing (LEM&P 2023) |
[ 発表日付 ] 2023年6月13日 |
Two-tone pattern transfer using nanoimprint and silver ink |
[ 共同発表者名 ] Keisuke Enomoto, Jun Taniguchi |
[ 学会・会議名 ] 35th International Microprocesses and Nanotechnology Conference (MNC2022) |
[ 発表日付 ] 2022年11月10日 ~ 11月10日 |
沸沸騰気泡共振器における噴出気泡と振動板の高速度計測 |
[ 共同発表者名 ] 小野 淳一郎, 海野德幸, 結城和久, 谷口淳, 佐竹信一 |
[ 学会・会議名 ] 熱工学コンファレンス2022 |
[ 発表日付 ] 2022年10月8日 ~ 10月9日 |
Investigation of filling behavior of UV nanoimprint by bridge structure |
[ 共同発表者名 ] Yusuke Murakami, Jun Taniguchi |
[ 学会・会議名 ] The 21st International Conference on Nanoimprint and Nanoprint Technologies (NNT2022) |
[ 発表日付 ] 2022年10月6日 ~ 10月6日 |
Two-tone pattern transfer using nanoimprint and silver ink |
[ 共同発表者名 ] Keisuke Enomoto, Jun Taniguchi |
[ 学会・会議名 ] The 21st International Conference on Nanoimprint and Nanoprint Technologies (NNT2022) |
[ 発表日付 ] 2022年10月6日 ~ 10月6日 |
Transfer durability of low concentration release agent coated replica mold with line and space patterns on ultraviolet nanoimprint lithography |
[ 共同発表者名 ] Tomohito Wakasa, Jun Taniguchi |
[ 学会・会議名 ] The 21st International Conference on Nanoimprint and Nanoprint Technologies (NNT2022) |
[ 発表日付 ] 2022年10月6日 ~ 10月6日 |
Fabrication of rose petal effect film by moth-eye structure mold and photolithography |
[ 共同発表者名 ] Kazuki Arai, Takuto Wakasa, Kazuki Fujiwara, Jun Taniguchi |
[ 学会・会議名 ] The 21st International Conference on Nanoimprint and Nanoprint Technologies (NNT2022) |
[ 発表日付 ] 2022年10月6日 ~ 10月6日 |
Prediction of Durability of the Mold for Production of Nanostructures in Ultraviolet Nanoimprint Lithography (UV-NIL) using Machine Learning |
[ 共同発表者名 ] Yuta Aoki, Junichiro Ono, Tomohito Wakasa, Jun Taniguchi, Shin-ichi Satake |
[ 学会・会議名 ] The 21st International Conference on Nanoimprint and Nanoprint Technologies (NNT2022) |
[ 発表日付 ] 2022年10月6日 ~ 10月6日 |
Life-time evaluation of low concentration release agent treatment of replica mold on ultraviolet nanoimprint lithography |
[ 共同発表者名 ] Tomohito Wakasa, Jun Taniguchi |
[ 学会・会議名 ] The 48th International Conference on Micro and Nano Engineering (MNE2022) |
[ 発表日付 ] 2022年9月21日 |
Fabrication of adhesive water-repellent film using moth-eye structure mold and photolithography |
[ 共同発表者名 ] Kazuki Arai, Hiroyuki Sugawara, Jun Taniguchi |
[ 学会・会議名 ] The 48th International Conference on Micro and Nano Engineering (MNE2022) |
[ 発表日付 ] 2022年9月21日 |
Fabrication of bridge structure using negative resist and electron beam lithography for investigation of transfer property on nanoimprint lithography |
[ 共同発表者名 ] Yusuke Murakami, Jun Taniguchi |
[ 学会・会議名 ] The 48th International Conference on Micro and Nano Engineering (MNE2022) |
[ 発表日付 ] 2022年9月21日 |
モスアイ構造とマイクロ構造形成による付着性撥水フィルムの作製 |
[ 共同発表者名 ] 荒井 樺月, 谷口 淳, 菅原 浩幸 |
[ 学会・会議名 ] 第83回応用物理学会秋季学術講演会(2022) |
[ 発表日付 ] 2022年9月20日 ~ 9月20日 |
ナノインプリントと銀インクを用いた2種類のパターン転写 |
[ 共同発表者名 ] 榎本 圭祐, 谷口 淳 |
[ 学会・会議名 ] 第83回応用物理学会秋季学術講演会(2022) |
[ 発表日付 ] 2022年9月20日 ~ 9月20日 |
橋掛構造による UV ナノインプリントの充填挙動の確認 |
[ 共同発表者名 ] 村上湧祐、谷口 淳 |
[ 学会・会議名 ] 2022年度精密工学会秋季大会学術講演会 |
[ 発表日付 ] 2022年9月7日 |
微細線構造レプリカモールドを用いた低濃度離型処理時の UV-NIL 転写回数の寿命予測 |
[ 共同発表者名 ] 若狭智仁、谷口 淳 |
[ 学会・会議名 ] 2022年度精密工学会秋季大会学術講演会 |
[ 発表日付 ] 2022年9月7日 |
Fabrication process and application of moth eye structure film |
[ 共同発表者名 ] 谷口 淳 |
[ 学会・会議名 ] 応用物理学会次世代リソグラフィ(NGL )技術研究会 主催 ワークショップ NGL2022 |
[ 発表日付 ] 2022年7月7日 ~ 7月7日 |
3D simulation and experiment of the fluid flow around structure with nano step made by UV-NIL |
[ 共同発表者名 ] Tadashi Ando, Yusei Honda, Tomoki Yanagawa, Noriyuki Unno, Jun Taniguchi, Shin-ichi Satake |
[ 学会・会議名 ] The 39th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2022年6月29日 ~ 6月29日 |
Fabrication of a Rose-Petal-Inspired Micro/Nanostructured Surface via the Ultraviolet Nanoimprint Lithography and Roll-Press Methods |
[ 共同発表者名 ] Kazuki Fujiwara, Hiroyuki Sugawara, Jun Taniguchi |
[ 学会・会議名 ] The 39th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2022年6月29日 ~ 6月29日 |
Fabrication of freestanding double-sided through-hole electrode films using imprint technique |
[ 共同発表者名 ] Atsuhiro Furuta, Jun Taniguchi |
[ 学会・会議名 ] The 39th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2022年6月29日 ~ 6月29日 |
Using Machine Learning to Predict the Durability of a Mold for Producing Nanostructures in Ultraviolet Nanoimprint Lithography |
[ 共同発表者名 ] Kazuki Okamoto, Tomohito Wakasa, Jun Taniguchi, Shin-ichi Satake |
[ 学会・会議名 ] The 39th International Conference of Photopolymer Science and Technology |
[ 発表日付 ] 2022年6月29日 ~ 6月29日 |